Bowl Centrifuge Oil Purifier

Description

US FilterMaxx 3000G Centrifuge
On Sale 0 off 2 only
1.5  Horsepower -1 gallon displacment bowl 5000 RPM
Filters Goop out of oil
Force Ventilated
-Does Not Collect Water in Clean Oil Tank
US Filtermaxx builds the Highest Capacity- Most Powerful Centrifuges
Videos:
http://bestcentrifuge.com/videos
YouTube videos:
http://www.youtube.com/user/USFiltermaxx/videos
See our book on Oil Processing
http://www.ebay.com/itm/170605608707?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Download the Centrifuge Manual:
http://bestcentrifuge.com/centrifuge_manual.pdf
Made in USA*
*Nearly all  small centrifuges are made in China
The US Filter Maxx is a heavy duty centrifuge that is easy to use and really gets the job done. Removes all impurities except collodial carbon.
This centrifuge will get more goop out of your WVO in 10 minutes than your spinner centrifuge will in 24 hours.
30% of our customers upgrade to FilterMaxx after using other centrifuges.
Compare our specs to centrifuges costing over 3 times as much!
Industrial quality. Not a cheap imported centrifuge.
Large
feed plate
is standard equipment and does not cost extra. Feed plate distributes oil evenly around circumfrence, does not channel oil to a few small spots.
Stainless Steel Spindle, Collet and Internal Hardware
Flow Rate:
This is a
ONE PASS
machine that may be pressure or gravity fed.
WVO, Motor oil or biodiesel up to 70 gallons per hour using large output port.
Optional Equipment:  (photos 7,8,9) Heater, Economy Controller, Deluxe Controller and Electric Ball Valve
The Machine:
The clean oil and dirty oil are separated by an internal dam and both drain continuously.
Input: 1/4 NPT   Output: 3/4 NPT or 1-1/4NPT upon request
3000 G's
Operating load is taken by a 1" diameter spindle with replaceable bearings, not the electric motor bearings. Motor bearings are not exposed to WVO.
The quick release spindle has double seals.
Quick release spindle removes in 1 minute or less with no tools, allowing you to clean inside the machine.
See Video 1
Belt overdrive system
drives the
5000 RPM
high-speed rotor
while the motor runs at 1800 rpm for a quieter, cooler running, longer lasting centrifuge.
Single phase
240V, or
3 phase
230V/460V motors available.
11.25-inch diameter bowl. Bowl displacement 235 cubic inches.
Sludge capacity 165 cubic inches.
Body is 1-inch thick aluminum casting.
Machine weighs 126 pounds
Machine is assembled and tested. NOT A KIT.
Photo of the centrifuge on the green tank processes fuel  for a 35kW generator that provides power 24 / 7
The machine may be upgraded to fully automatic operation. The optional control panel is seen in the photos above. Non clogging  Electric Ball Valves are also available:
http://www.ebay.com/itm/US-FIltermaxx-1-2-inch-NPT-SS-Electric-Ball-Valve-WVO-Biodiesel-Centrifuge-/170736770711?pt=LH_DefaultDomain_0&hash=item27c0b45e97
Centrifuge Manual:
http://bestcentrifuge.com/centrifuge_manual.pdf
Warranty:
1-year top to bottom parts and labor.
We warrenty the motor
so that you do not have to deal with a 3rd party ie "factory warranty"
Freight charges on returned parts are responsibility of the owner
.
Shipping:
Limited time:
Free shipping
for the lower 48 states. AK, HI and PR request quote. International shipping: we get a 50% to 70% discount on international shipping so please ask for a quote.
904 334-2838
Please ask if you have any questions
.
l